Your position: Home >Fold Door Hardware Accessories> Installation of folding door
Folding Door Hardware Accessories -Installation of fold door
Quad-folding Door (ZD-4-01)
List of Other Hardware Accessories (ZD-4-01)

Accessories
Pulley
NH-70
Upper Slideway
NH-001
Down Slideway
NP-01
Upper
NP-28
Down
NP-29
Volume
4
1
1
2
2
Accessories
Slideway
NP-23
Hinge
NP-39
Pulley Panel
NH-061
Intro Plus
NP-42
Handle
DH-120P
Volume
4
6
4
1
4


Installation

 
1. Fix the supporting board NP -24 in the upper slideway NP-01. (No tight screw for adjustment)
 
2. Fix the supporting board NP -24 in the upper slideway NP-01. (No tight screw for adjustment)

3. Fasten the slideway NP -01 in the slot of upper frame.

4. Fasten the slideway NP -01 in the slot of upper frame.

5. Fasten Magnetic sway retainer NP -61 in the lower part of the door.

 

6. Align the two doors and fasten them with central hinge NP-39

7. Fasten the slideway NP-21, upper axis NP-21, down NP-22 as showed in the guide with NP -42 in the hole.

8. Lean the door as showed in the guide and insert the upper axis and slideway in the concave of supporting board and slideway. Raise the door vertically and align the head of down axis with the concave of the supporting board. Push down the door.

9. Fasten the hanle DH -120 in the hole.

 

Adjustment

 

1. If the case happens below, please loosen the hexagon head screw of the supporting board with spanner NP-41.Make the door vertical after adjustment.
Fasten the door with screws.

2. If the case happens below, please span the hexagon head screw of down axis NP-22 with spanner NP-41 to adjust clearance between door and frame.

 

3. Align the central of upper and down axis while adjusting.

 

Product Category
Content Guide
Shanghai Nakao Hardware Ltd. Inc. Copyright 2006
Address: 285 Chen Bao Road , Ma Lu, Jia Ding District, Shanghai. FAX:021-69154695

雪梨app下载安装_雪梨app下载官网_雪梨app客户端_雪梨app是什么